Genvik plastic submersible pumps are outer stainless steel construction not only prevents the pumps from corrosion but also exceptionally increases the life-span. All these submersible pumps are multistage single suction centrifugal type, provided with integral check-valve and NEMA standard coupling. The integral check valve prevents back flow and reduces the risk of water hammer which paves the way for trouble free performance. The screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign Particles.
Application
Material of Construction
| Check Valve Housing |
SS 304 / 316 |
| Diffuser |
Noryl |
| Impeller |
Noryl |
| Valve |
SS 304 / 316 |
| Cable Guard |
SS 304 / 316 |
| Coupling |
SS 329 |
| Suction Interconnector |
SS 304 / 316 |
Non-aggressive, non explosive, pure, cold, fresh water without abrasive particles having the following characteristics.
| Ph |
6.5 to 8.5 |
| Turbidity |
50 ppm silica scale (max.) |
| Viscosity |
1.75x10 m²/sec (max.) |
| Hardness (Drinking Water) |
300 (max.) |
| Specific gravity |
1.004 (max.) |
| Allowable solids |
3000 ppm (max.) |
| Chlorine ion density |
500 ppm (max.) |
| Permissible amount of sand |
0.42lb / 1000 gal (max.) |
| Temperature |
38°C (max.) NBR, 90°C VITON |