Genvik Water Filled submersible motors are wet type, eco friendly and rewindable. The stator shell and motor base made of SS 304 / 316 grade stainless steel which prevents the motor from corrosion. Dynamically balanced rotors maintains uniform clearance thereby giving better efficiency and increases the lifecycle of the bush bearings. To withstand high axial thrust load and upthrust load specially designed high performance thrust bearings are used. The main advantage of the Genvik rewindable motor construction is making the repair and rewinding easier at any fields. Sealing are made by means of ‘O’rings to avoid leakage. To prevent the sand and fibre particles into the motor sandguard and shaft seals are used. Ensure that the motor does not run when it is not submerged in the water. To balance the pressure variations inside the motors rubber diaphragm is installed. Genvik motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA Standard.
| Nominal diameter in Inches |
8” |
| Power Range |
0.37 to 185 kW |
| Speed |
3450 rpm |
| Degree of Protection |
IP 58 / 68 |
| Duty |
S1 Continuous |
| Class of Insulation |
Y |
| Mounting Dimension |
NEMA Standard |
| Max. Liquid Temperature |
38®C |
| Nominal Dia |
8″ |
| KA Series |
KB Series |
| Stator Shell |
SS 304 / 316 |
SS 304 / 316 |
| Housing Shell |
SS 304 / 316 |
CI |
| Power Cable Type |
3/4 Core PVC Insulated / Rubber |
3/4 Core PVC Insulated / Rubber |
- These submersible motors are appropriate to couple with deep well submersible pumps.